Car windows that are tinted have become increasingly popular whether it is for the privacy that they offer, or the protection from the sun’s heat and rays or whether it is for it’s for their simple sleek and polished look. While tinting car windows can be a difficult task that should probably be left for the professionals, if you think you have the time and skills to do a good job yourself, then the following basic steps will help you get started.
Understanding your options
One of the critical steps to consider before you get started is to understand the regulations and policies on automotive tints they have in your local area or state. The rules and regulations on window films on cars differ from state to state as darker tinted glass can make it hard for traffic or law enforcement to catch hit and run drivers, or make eye contact with potential suspects at traffic stops. These tinting regulations can be easily accessible in reputed car tinting stores or even the local police station.
Types of tints available
There are a vast variety of car tints available in the market with the popularity of tinting cars increasing. You must look in to reputed stores or a window film for home that sells quality products with a warranty. The types of films can vary from a specific shade to a certain effect such as reflective, metallic or even mirrored. There are pros and cons to each type of film and you must understand these options very well before you decide on what you choose, keeping in mind the regulations of your locality at all times. The most common types are the OEM tinted windows which last throughout the lifetime of the glass, however these glasses can also be expensive to install and replace. The next type would be the coating tint which is usually a spray. The third and most common type is the film tint which is the least expensive but will need replacement every 5 years at least.
Application of the film
Before you get started on the application of the window film, it is mandatory to thoroughly clean the windows using window cleaning solutions and sponges. This procedure will have to be repeated until all the dust and dirt are completely removed from the glass. It is important to do so to prevent any air bubbles in the glass during the application of the film. Don’t forget to clean the binding of the frame in which the window is being held.